<form id="xgbxx"></form>

    <form id="xgbxx"><legend id="xgbxx"></legend></form>
  1. <nav id="xgbxx"><big id="xgbxx"><td id="xgbxx"></td></big></nav>

      <sub id="xgbxx"><table id="xgbxx"><th id="xgbxx"></th></table></sub>
      <form id="xgbxx"></form>
      <wbr id="xgbxx"></wbr><sub id="xgbxx"><table id="xgbxx"></table></sub>
      <form id="xgbxx"><legend id="xgbxx"></legend></form>

      ATI Nickel ATI 201?

      牌號ATI Nickel ATI 201?
      廠家Allegheny Technologies Incorporated
      分類Nickel
      介紹ATI 200 alloy (UNS Designation N02200) and ATI 201 alloy (UNS Designation N02201) are wrought commercially pure nickel. The alloys differ only in the maximum carbon level allowed by specification, 0.15 percent maximum for ATI 200 alloy and 0.02 percent maximum for ATI 201 alloy. Either alloy provides highly ductile mechanical properties across a wide temperature range. Either alloy provides corrosion resistance in neutral to moderately reducing environments. In the annealed condition, either alloy possesses the approximate strength of mild steel. As-rolled material is sometimes furnished to provide higher strength levels.

      The nickel alloys are readily fabricated by standard fabrication practices. The materials are covered by a variety of specifications and are assigned maximum allowable stresses in the ASME Boiler and Pressure Vessel Code.

      The ATI 200 and ATI 201 alloys provide high thermal and electrical conductivity in comparison to nickel base alloys, stainless and low alloy steels. The ATI 200 and ATI 201 alloys are ferromagnetic.

      Because long-time exposures of ATI 200 alloy in the 800 to 1200°F (427 to 649°C) range result in precipitation of a carbon containing phase and loss of ductility, the ATI 200 alloy is not recommended for service above 600°F (316°C). In applications above 600°F (316°C), however, the low carbon ATI 201 alloy may be considered. As proposed service temperatures approach 800°F, (427°C), resistance to creep should be considered a design criterion.
      在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
      申請技術報告方式

      可通過以下我公司客服QQ,索要技術報告

      客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
      Allegheny Technologies Incorporated 產品展示 種類
      ATI Nickel NiTi SEA 2? Nickel
      ATI Nickel ATI 718? (Sheet, Plate & Strip) Nickel
      ATI Nickel ATI X-750? Nickel
      ATI Nickel ATI HB-2? Nickel
      ATI Nickel NiTi SMA 1? Nickel
      ATI Nickel ATI 720? Nickel
      ATI Nickel ATI 706? Nickel
      ATI Nickel ATI 690? Alloy TREX Nickel
      ATI Nickel ATI H-N? Nickel
      ATI Nickel ATI 718-OP? Nickel

      訂購說明

      上海松翰塑化科技有限公司訂貨流程

      【訂購導引】
             我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,FDA等)!
             如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

      【物流說明】
             自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


      【訂購流程】
      訂貨流程



      【退換貨處理】
      退貨:
      依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
      司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

      換貨:
      若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
      版權所有 ? www.fragathelabel.com All Rights Reserved
      超强干人人爱欧美长视频|2020年国产黑色丝袜视频|国产在线观看无码不卡顿|国产亚洲情侣一区二区无

        <form id="xgbxx"></form>

        <form id="xgbxx"><legend id="xgbxx"></legend></form>
      1. <nav id="xgbxx"><big id="xgbxx"><td id="xgbxx"></td></big></nav>

          <sub id="xgbxx"><table id="xgbxx"><th id="xgbxx"></th></table></sub>
          <form id="xgbxx"></form>
          <wbr id="xgbxx"></wbr><sub id="xgbxx"><table id="xgbxx"></table></sub>
          <form id="xgbxx"><legend id="xgbxx"></legend></form>